NSR Marine NVR-3000 Operation And Installation Manual Download Page 56

Page: 56 / 105

NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL

NVR-3000 OM.E 20210412-02

②

After you have completed communications, click

[OPTION],

select

[Quit]

to Main screen.



Unable to acknowledge call received:

①

Click

CLICK

to silence the audio alarm and erase the pop-up message. The reason for

[UNABLE ACK]

displayed on the screen.

Reason for unable to acknowledge

NO REASON

CONESTION*

BUSY

QUEUE

STA. BARRED

NO OPERATOR

TEMP. NO ONE

EUT DISABLED

CH UBABLE

MODE UBABLE

*: Coast station use

②

Click

[OPTION]

, select

[Quit]

to Main screen.

Note: If the coast station sends the message "QUEUE", wait until your turn comes.

If there is no response from the receiving station, do one of the following procedures:

Resend call:

Click

[OPTION]

, select

[Resend]

Cancel call:

Click

[OPTION]

, select

[Quit]

, then select

[Yes]

to cancel the call.

4.3.1.2 Receive an individual call

Unable acknowledge is sent automatically or manually depending on the acknowledgement method setting. Able

acknowledge is sent only manually.

Note: The handset must be on hook and all sessions must be quit to enable automatic acknowledge.

Summary of Contents for NVR-3000










































































































Search results

Summary of Contents for NVR-3000

Reviews:

Related manuals for NVR-3000

Brands by name

Popular brands

NSR Marine NVR-3000, Operation And Installation Manual

Search results

Summary of Contents for NVR-3000

Reviews:

Related manuals for NVR-3000

Brands by name

Popular brands