NSR Marine NVR-3000 Operation And Installation Manual Download Page 25

Page: 25 / 105

NVR-3000 OPERATION MANUAL & INSTALLATION MANUAL

NVR-3000 OM.E 20210412-02

2.11.1 Private Channel

Click

[PRIVATE CHANNEL

], the following screen appears:

①

View/Edit a private channel:

Move the cursor to the wanted channel, click

[VIEW

], the

[CHANNEL EDIT]

screen appears:

You can click the

TYPE

frequency

frequency to edit. For example:

Click

[TX]

, enter the TX frequency with the numeric keys in

[INPUT].

Click

to confirm the input. Click

SAVE

and choose “

YES

” to save the edition, “

” to discard the edition.

②

Add a channel: Click

[ADD

], open the

[CHANNEL EDIT]

screen. The operation is same as above.

③

Delete a channel: Move the cursor to the wanted channel. Click

[DELETE

], delete the channel directly.

④

Call: Move the cursor to the wanted channel. Click

[CALL

], open Main screen to start voice communication.

Summary of Contents for NVR-3000










































































































Search results

Summary of Contents for NVR-3000

Reviews:

Related manuals for NVR-3000

Brands by name

Popular brands

NSR Marine NVR-3000, Operation And Installation Manual

Search results

Summary of Contents for NVR-3000

Reviews:

Related manuals for NVR-3000

Brands by name

Popular brands