NSI MIDI 616, Operation Manual

Page: 5 / 42

SOFTPATCH DUMP
Softpatch data may be dumped to most sequencers for automatic reconfiguration of Softpatch when the
sequence is played back.
To initiate a dump; hold the GO and BACK buttons down together, while pressing the FLASH 4 button.
The current Softpatch configuration will then be instantly sent out of the MIDI port in the form of a
System Exclusive command.
SOFTPATCH RESET
The Softpatch configuration may be reset to the factory default setting by following this procedure:
1. Remove microphone cord from MIDI 616 console.
2.
Hold all four FLASH buttons down together.
3. Reconnect microphone cord to MIDI 616 console while still holding all FLASH buttons down.
4. Release Flash buttons. Softpatch is now reset.