ANALOG TO / MERGED WITH DMX 512 and MICROPLEX
In this application, 0 to 10VDC is converted to Microplex or and DMX 512..
CONNECTOR
OPERATION
Microplex IN
Input Microplex
Microplex OUT
Output Microplex (64 or 128)
DMX IN
Input DMX 512
DMX out
Output new DMX 512
MIDI / Analog
0-10VDC input
Luma-net
Not Used
RS-232
Not Used
JUMPER LOCATIONS
P4 & 5
P7
JP6 & 7
JP8 & 9
JP10
JP11
JP12
JP13
OPEN
CLOSED
N/A
2-3
2-3
2-3
N/A
2-3
P6
P8
JP1
DMX OUT CABLE
*CLOSE TO TERM
DMX
N/A
N/A
JP4
DIPSWITCH POSITIONS
C1
C2
C3
C4
ADDRESS 1 - 7
A8
DN
UP
DN
UP
STARTING ADDR OF ANALOG CHAN 1 BY 1 INCREMENT DN:64
Four analog 0-10V channels are merged with DMX-512 or Microplex and output as DMX-512 and Microplex.
Channel number of first analog channel is determined by A1-7.
DMX and Microplex output is sent as either 64 or 128 channels, depending on the setting of switch A8.
*Close P6 if inputting DMX. IF 501 is always last device at end of DMX line.
INTERFACE UNIT
Software Revision 1.05, Version A
ANALOG TO / MERGED WITH DMX 512 and MICROPLEX
NSI CORPORATION
16
