DOWN
This keyword specifies the fade down time of the previous cue. This keyword must be followed by a space and
the time in the range of ‘‘0" to ’’9:59.9". Minutes are optional but must be followed by a colon. In the absence
of minutes, seconds may be specified up to ‘‘999.9". The decimal point is not necessary if no decimal is specified.
If the DOWN keyword is not specified in a cue definition then either ’’0" or the DOWN value of the previous
cue will be used.
EXAMPLE: DOWN 1:30
DELAY
This keyword specifies the time delay before the downfade of the previous cue. This keyword must be followed
by a space and the time in the range of ‘‘0" to ’’9:59.9". Minutes are optional but must be followed by a colon.
In the absence of minutes, seconds may be specified up to ‘‘999.9". The decimal point is not necessary if no
decimal is specified. If the DELAY keyword is not specified in a cue definition then either ’’0" or the DELAY
value of the previous cue will be used.
EXAMPLE: DELAY 30
WAIT
This keyword specifies the time delay before the execution of a linked cue. This keyword must be followed by
a space and the time in the range of ‘‘0" to ’’9:59.9". Minutes are optional but must be followed by a colon. In
the absence of minutes, seconds may be specified up to ‘‘999.9". The decimal point is not necessary if no decimal
is specified. If the WAIT keyword is not specified in a cue definition then a automatic link will not be performed,
and the GO button must be pressed to execute the cue specified.
EXAMPLE: WAIT 1.1
CHANNEL
This keyword is used to specify the channel levels (in percent) of each non-zero channel of the cue. This keyword
must be followed by a space and the channel levels in the format of ‘‘channel,level’’. As many channel/level pairs
may be included on a line as will fit. Each channel/level pair must be separated by a space. Each additional line
specifying channel levels must also begin with the keyword. Full level is represented by ‘‘100" ,’’FF", or ‘‘FL’’.
Any channel not specified will be zero.
EXAMPLE: CHANNELS 1,50 20,25 21,25 22,100
INTERFACE UNIT
Software Revision 1.05, Version A
Keywords Supported.
NSI CORPORATION
25
