NSD VE-2CC, Specifications & Instruction Manual

Page: 26 / 32

21
(2) Current position value setting program
Indicates an program example for setting the current position
value.
Following program example is using a programmable controller
of MELSEC-Q series.
The parameter should be set as right figure.
Also, the station No. of VE-2CC / VM-2CC is set at 1 and 2.
This is a program example when setting the current position
for the station No.1 of VE-2CC / VM-2CC.
For more details, refer to the user’s manual of the master unit.
Readout the current position value
(Station No.1)
Designating the current
position setting data
PRESET signal ON
PRESET signal OFF
Remote input (RX)
NRDY signal
Remote input (RX)
NRDY signal
External input
Preset answer
back signal
Readout the current position value
(Station No.2)