NVR-7716P16-
H2 User’s manual (Short) ver.1.0
All rights reserved © AAT Holding S.A.
14
V. IP Camera Management: menu allows to manage IP cameras connected to the system. There are
two possibility to connect IP cameras:
Camera is connected to build-in PoE switch. In such situation camera will be automatically
discovered and added to NVR at channel corresponding to PoE port of NVR (A selection).
Also no need to provide camera password if it’s camera default password. If you modify
password you have to fill it in by clicking EDIT channel. I it will also fit to other cameras it
would be automatically used for them.
Note:
NVR has included automating camera IP assign. If IP conflict will be detected IP addresses of
conflicted cameras would be changed automatically.
Camera is connected to external switch by LAN port. In such situation all cameras will be
discovered and displayed as list (B). To add camera just click + , if its status is green
then it would be added to the system at first empty channel (after PoE channels - C), if
status would be red then pop up window is dipsplayed to provide user name and
password. In the same way add other cameras.
Note:
NVR saves password automatically. If you provide unique password while adding one camera it would
be automatically used for connecting with other cameras.
NVR OPERATING
A
C
B
