NVR-7716P16-
H2 User’s manual (Short) ver.1.0
All rights reserved © AAT Holding S.A.
12
3.4. Startup configuration
Prior to using NVR for the first time, initial setup is strongly advised. Before you connect the IP
cameras to the NVR, please set up network and stream parameters of IP cameras in the right way.
Note:
For suggested values for IP camera setting please refer to the “Cameras Capability Table” available
on the www.novuscctv.com website. If you set wrong values some problems may appear: the NVR
cannot search the IP camera, the stream cannot be connected, the image is not fluent, the image quality
is bad and so on.
In case of first NVR start QUICK SETTING menu window appears (if function wasn’t disabled
earlier). To configure NVR please follow procedure like below, after step 5 NVR will be ready to
work:
I.
Cloud Service: menu allows to enable cloud access to NVR. After changing parameters click
SAVE button. There are also two QR codes to scan in mobile device, first is link for mobile
software, and second is serial number of NVR to easy connect NVR.
II.
Time Settings: menu allows to configure NVR local time and NTP settings. After changing
parameters click SAVE button for each submenu.
NVR OPERATING
