NVR-7716P16-
H2 User’s manual (Short) ver.1.0
All rights reserved © AAT Holding S.A.
13
III. Network Settings: set up network parameters : IP (by default it is 192.168.1.100) SUBNET
MASK (by default it is 255.255.255.0). Optionally if you are going to connect NVR to the
Internet (for cloud access, sending email, etc) set up GATEWAY, PRIMARY and BACKUP
DNS. You can alternatively check DHCP mode (DHCP server is required in this method in target
network) then all settings will be set up automatically.
Note:
When you use DHCP server check IP address lease and its linking with NVR MAC address to avoid
changing or losing IP address during device operation or network/DHCP server breakdown. This
solution is not recommended for security systems.
Note:
Be sure that IP addresses and subnet mask of the NVR and the IP cameras are in the same network
subnet (e.g. for the NVR IP address 192.168.1.188, and mask 255.255.255.0 appropriate address for
the camera ranges from 192.168.1.1 to 192.168.1.254, for example 192.168.1.201). It is not allowed to
set the same addresses for multiple devices.
IV. HDD Manage: menu allows to prepare new installed hard disk to work. If you run it for the first
time simply click ALL FORMAT button, and wait until progress will finish.
NVR OPERATING
