NVIP
-
5H
-
4402/F
Quick start guide
ver 1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
START
-
UP AND INITIAL IP CAMERA CONFIGURATION
2.3. Camera mounting
To mount a camera please follow the instructions below:
•
Put the bracket to the wall in a desired mounting place (with cable hole)
•
Taking the bracket
’
s base screw holes as a pattern, mark future drilling holes for screws.
•
Drill holes in accordance with previously done markings and base hole placement.
•
Connect the cables and mount the camera with bracket on the ceiling/wall with three supplied
self tapping screws.
•
Loosen screws
“
A
”
.
•
Adjust camera position, set appropriate field of view and focus (regulators are located under
the lid
"B"
)
•
Tighten screws
“
A
”
.
WARNING!
Please note that the wall or ceiling should be even and must have enough strength to support the
camera.
WARNING!
The declared degree of protection of the camera relates to its housing and does not take into
account the possibility of moisture infiltration into the interior of the camera by connecting
cables. Connection cables protection through i.e. sealing up is the responsibility of the camera
installer. The manufacturer is not liable for any damages to the camera caused as a result of
failing in performing that activity by installer, which also means that camera damaged in that
way is not subject to warranty repairs.
Focus
Zoom
A
C
The camera is equipped with a face recognition function which, in addition to proper
configuration, requires the camera to be installed in the right way and to ensure proper
working conditions. Before installing the camera, please read the instructions in the
"Installation Tips" manual, available for download on the product page.
