NVIP-
5000 series user’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
7
Network connection using switch and external power supply.
Network connection using external power supply, directly to the computer.
1.3.
Initial configuration via the web browser
The default network settings for NVIP-
… IP camera series are :
1. IP address=
192.168.1.200
2. Network mask -
255.255.255.0
3. Gateway -
192.168.1.1
4. User name -
root
5. Password -
pass
Knowing the camera’s IP address you need to set PC IP address appropriately, so the two devices can
operate in one network subnet ( e.g. for IP 192.168.1.1, appropriate address for the camera is from
range 192.168.1.2 to 192.168.1.254, for example 192.168.1.60). It is not allowed to set the same
addresses for camera and PC computer
You can either set a network configuration (IP address, gateway, net mask, etc.) of NOVUS IP camera
yourself or select DHCP mode (DHCP server is required in this method in target network) by using
web browser or by NMS software. When you use DHCP server check IP address lease and its linking
with camera MAC address to avoid changing or losing IP address during device operation or network/
START-UP AND INITIAL CAMERA CONFIGURATION
Computer
IP Camera
Network transmission - cross over cable
IP Camera
Network transmission
Network Switch
Computer
Network
transmission
