NVIP-
5000 series user’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
37
To set the motion detection area, press the
MOTION AREA
button. The following window will be
displayed.
Hold down the left mouse button and mark the region to add a mask area. When you need to remove
the mask area, click the right mouse button.
Press
REVERSE
button to reverse selection of area.
Press
CLEAR
button to erase all the selected areas.
Choose the
SENSITIVITY
of motion detection, using
button and press
OK
button. The bigger value
is set the higher sensitivity of the movement. With high sensitivity camera will detect the least image
change.
OUT CHANNEL
- select that option to turn on output alarm, linked with motion detection.
CAMERA, TYPE, NAME
in
PTZ window
part - options not available.
WWW INTERFACE - WORKING WITH IP CAMERA
