NVIP-
5000 series user’s manual ver.1.0
All rights reserved © AAT Holding sp. z o.o.
13
2. Video Parameter
Stream
- Stream ID (choose one from available streams)
Bite Rate Type
- Bit rate type
Bit Rate (kbps)
- Bit rate
I Frame Interval
- I frame interval
Quality
- Quality
USE TIME STAMP - Video buffer (increases delay when enabled, maximum delay is 5s)
NOTICE:
USE TIME STAMP
function will not be available when using Flash instead of Activex.
3. Camera Control
Function unavailable.
4. Menu bar
Change Password
- Change users password
NOTICE: Default password "pass" can be restored only after restoring default settings of the camera)
Sign Out
- Log out from camera
5. Video Control
Camera
- Default number of the camera is 1.
Video
- Turn on/off video
Audio
- Turn on/off audio
Interphone
- Turn on/off Interphone
NOTICE:
Audio and Interphone
functions will not be available when using Flash instead of Activex.
3.2. Sensor Setting
This menu allows user to adjust image settings. To enter to the
Sensor
menu, click right mouse button
on the video screen in
Live Video
tab and choose
Sensor Config
.
To restore sensor’s factory settings, press
FactorySettings
button and confirm that operation.
To reset parameters to last saved, press
Reset
button.
After performing adjustments, apply them by selecting
Save
.
To close dialog without saving any changes, press
Cancel
button.
WWW INTERFACE - WORKING WITH IP CAMERA
