NVIP
-
2V
-
6502M/F Quick start guide version 1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
8
START
-
UP AND INITIAL CONFIGURATION
1.4 Package contents
After you open the package make sure that the following elements are inside:
•
IP camera.
•
Accessories bag.
•
Quick start guide.
If any of this elements has been damaged during transport, pack all the elements back into the original
box and contact your supplier.
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short
-
circuits and damage the device as a result.
2.START
-
UP AND INITIAL CONFIGURATION
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
2.1 Description of connectors and adjustment buttons
1. 100 Mb/s Ethernet port (PoE RJ
-
45 connector)
2. Audio input MIC (Jack 3.5mm)
3. Audio output HP (Jack 3.5mm)
4. BNC CVBS video output
5. Alarm input/output terminal block
•
Alarm output COM
•
Alarm output OPEN
•
Alarm input INA
•
Alarm input GND
6. Power supply 12VDC
7. Zoom
+/
-
buttons
8. CVBS video output
9. Micro SD card slot
10. Reset button
1
2
3
4
5
6
7
8
9
10