NVIP
-
2V
-
6502M/F Quick start guide version 1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
CAUTION!
Do not use power supplies and POE adapters not compatible with IEEE 802.3af standard!
Damage resulting from the use of improper power supply is not covered under warranty!
In order to provide protection against voltage surges/lightning strikes, usage of appropriate
surge protectors is advised. Any damages resulting from surges are not eligible for service
repairs.
2.4 Camera mounting
To mount a camera please follow the instructions below:
•
Unscrew the camera cover
(5)
by turning counter
-
clockwise.
•
Remove the camera housing
(4)
.
•
Put the bracket to the wall in a desired mounting place (with cable hole). Take the drill pattern
and mark future drilling holes for screws and wires.
•
Drill holes in accordance with previously done markings and base hole placement.
•
Mount the camera base
(1)
using the supplied plugs and screws.
•
If necessary, mount microSD card in the socket
(3)
,
than connect the camera wires.
•
Adjust camera position, if necessary, connect service monitor, adjust lens using
Zoom +/
-
buttons
(2).
•
Screw the camera housing
(4)
back on camera.
•
Screw the camera cover
(5)
by turning it clockwise.
START
-
UP AND INITIAL CONFIGURATION
1
2
3
4
5
