NVIP
-
2V
-
6502M/F Quick start guide version 1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
9
2.2 Connecting ethernet cable
To maintain tightness of ethernet cable connection, please follow instruction below:
1. Loose the nut
(a)
from the main element
(b)
.
2. Run power cable (without RJ
-
45 connector) through both elements.
3. Then crimp the cable with RJ
-
45 connector.
4. Connect the cable to the hermetic connector
(c)
,
screw main cover
(b)
,
then screw the nut
(a)
.
The declared degree of protection of the camera relates to its housing and does not take into account
the possibility of moisture infiltration into the camera by connection cables. Connection cables
protection through i.e. sealing up is the camera installer duty.
The manufacturer is not liable for any camera damages caused as a result of failing in performing that
activity by installer, which also means that camera damaged in that way is not subject to warranty
repairs.
CAUTION!
Camera power supply connector is not hermetic. Installer should seal this connector by himself.
2.3 Connecting power supply cable
Camera can be supplied using external power supply unit corresponding with the camera parameters or
by using RJ45 network socket and PoE power supply unit. To power the camera via PoE, use a network
switch or PoE adapter compatible with the IEEE 802.3af standard. If you
’
re using external power
supply please connect wires according to polarisation shown on picture below. Power supply adapter is
not included.
START
-
UP AND INITIAL CONFIGURATION
a
b
c
a
b
12 VDC +
GND
