NVIP
-
2H
-
8002M/LPR, User
’
s manual (short) ver.1.0
All rights reserved © AAT Holding S.A.
26
ELECTRIC CONNECTORS AND ACCESORIES
7. ELECTRIC CONNECTORS AND ACCESORIES
7.1. Connecting power supply to the camera
The camera can be supplied only by power supplay with parameters compatible with camera
specification to power camera via power in jack.
Caution : Make sure to follow the correct polarity if connecting the camera to DC power.
Polarity is marked on the power connector.
Caution: In order to provide protection against voltage surges/lightning strikes, usage of
appropriate surge protectors is advised. Any damages resulting from surges are not eligible for
service repairs.
Caution:
It is forbidden to use –
as the camera power source –
PoE equipment (adapters, etc.) not
compatible with IEEE 802.3af standard (items called
“
passive PoE power supply
”).
Damages that
results from the usage of improper power supply source are not covered by the warranty.
7.2. Connecting alarm inputs/outputs.
Description of connectors is in chapter 2.4.
Alarm Input
•
Typical Alarm Input connection
12 VDC +
12 VDC
-
SCHEMA OF 12VDC POWER SUPPLY CONNECTOR
