NVIP
-
2H
-
8002M/LPR, User
’
s manual (short) ver.1.0
All rights reserved © AAT Holding S.A.
14
Put video and power cables through a previously drilled hole in the wall/ceiling.
Align the
mark on
camera
with the
mark on the mounting plate,
camera approximately 10° clockwise, and then
the
counterclockwise to slide the
hinge screw into the notch on the
plate.
Attach the camera to the mounting plate using the allen screws.
(Optional) Unscrew
the service compartment
open
the service compartment. Connect
the
RCA service analog output to monitor.
Make connections of all necessary electrical connectors (description in chapter 7 of this user
’
s
manual).
Manually point the camera in a desired direction to obtain a desired scene view.
Close the service compartment and screw the service compartment screw.
INSTALLATION
TOP mark on
camera base
TOP mark on
mounting plate
Mounting plate notch
Service compartment
Allows you to rotate
the camera 360°
Allows you to tilt the camera
and camera stand 90°
Allows you to rotate the
camera and camera stand 360°
