NVIP-2DN5001H/IR-1P, NVIP-3DN5001H/IR-1P, NVIP-5DN5001H/IR-1P
User’s manual (short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
10
3. INSTALLATION
Put mounting drawing paper to the wall or ceiling and mark drill holes.
Drill holes using markings.
Drill additional hole for video and power cables.
Put video and power cables through a previously drilled hole in the wall/ceiling.
Using mounting screws from the package, attach the plate of camera to the ceiling/wall.
Unscrew
the service compartment screws and
open
the service compartment. Connect the
BNC
test cable to video output and monitor.
INSTALLATION
Plate of the
camera
Service
compartment
