NVIP-2DN5001H/IR-1P, NVIP-3DN5001H/IR-1P, NVIP-5DN5001H/IR-1P
User’s manual (short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
21
8. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
software (web browser level) resetting the camera settings
hardware (using reset) restores factory defaults.
8.1. Restoring software factory defaults
Factory software default restores default settings of the IP camera (optional except network settings).
The camera re-starts then, taking about one minute to complete. Option to restore the factory default is
described in
MAINTENANCE -> DEFAULT SETTINGS
tab.
8.2. Restoring hardware factory defaults in IP cameras
In order to restore factory defaults for the camera please follow the instructions:
unscrew
the service compartment screws and
open
the service compartment,
press the
RESET
button and hold on for 5 seconds,
release button,
log on after approx. 1 minute using default IP address (http://192.168.1.200) and default user name
(root) and password (pass),
close the service compartment and firmly screw the service compartment screws.
RESTORING FACTORY DEFAULTS
Reset button
