NVC-GDN4801V/H-2, NVC-GDN4801V-2, NVC-GDN4801V/IR-2, NVC-GDN4801V/IRH-2
1.3 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
11
4.1 CONNECTIONS
Warning: Device should be supplied only from power sources whose parameters are
in accordance with those specified by the producer in the technical datasheet of the
camera. Therefore, it is forbidden to supply the camera from power sources with
their parameters unknown, unstable or not meeting the producer’s requirements.
Cameras are equipped with plugs/power terminal blocks depending on a model, and may be
supplied with 12VDC/24VAC (NVC-GDN4801V/H-2, NVC-GDN4801V-2, NVC-GDN4801V/IR-2
model) or 24VAC (NVC-GDN4801V/IRH-2 model). When connecting power supply please ensure
that the power plug has proper polarisation.
Warning: If the alarm output or RS-485 control port output is not used, please protect them
against short-circuiting.
Warning: NVC-GDN4801V/IRH-2,
NVC-GDN4801V/H-2
heater works only when the camera is
24V AC supplied.
INSTALLATION
Output description
1.
BNC plug (video output)
2.
24V AC terminal block
3.
RS-485 cable
•
RS-485 (-) - orange
•
RS-485 (+) - white
4.
alarm output
•
out (green)
•
common (black)
5.
12V DC terminal (heater inactive!)
+
- (GND)
1
2
3
4
5
NVC-GDN4801V/H-2
,
NVC-GDN4801V-2,
NVC-GDN4801V/IR-2, NVC-GDN4801V/IRH-2
