NVC-GDN4801V/H-2, NVC-GDN4801V-2, NVC-GDN4801V/IR-2, NVC-GDN4801V/IRH-2
1.3 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
12
4
.1.1 Extra video output connection
Camera has an additional video output which is very useful during installation or camera
maintenance. To use the extra video output please connect the included cable (mentioned in the
chapter 1 equipment list) to the extra video connector presented in the chapter 3.2.
4.2 RS-485 port
RS-485 port enables remote setup of the camera. Communication between remote controllers (such as
keyboards, DVRs, PCs) via RS-485 utilizes PELCO-D or PELCO-P protocol. Usage of UTP cat. 5
cable is advised. One pair of wires is used in transmission process.
RS-485 485 (+)
Remote control RS-485 connector, connect with corresponding RS-485 (+) output
located on the keyboard or any other remote control device. Transmission speed depends on camera
settings.
RS-485 485 (-)
Remote control RS-485 connector, connect with corresponding RS-485 (-) output
located on the keyboard or any other remote control device. Transmission speed depends on camera
settings.
Remote control procedures using NOVUS KBD70, KBD60, KDB40 keyboards and Pelco-D protocol
are described below:
95 + PRESET SET - Display main menu screen, enter submenus, select highlighted position,
JOYSTICK MOVEMENT UP/DOWN - select particular menu positions,
JOYSTICK MOVEMENT LEFT/RIGHT - select function or change selected values
INSTALLATION
