NVC-GDN4801V/H-2, NVC-GDN4801V-2, NVC-GDN4801V/IR-2, NVC-GDN4801V/IRH-2
1.3 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
14
5. SETTINGS
NVC-GDN4801V/X
cameras are equipped with an OSD menu. During camera operation, status
information may be displayed on the screen.
As mentioned before, a joystick is placed near the camera module for navigating and changing menu
settings :
In order to enter the menu press the joystick, which results in executing
SET
command. For choosing
the submenus please press the
UP, DOWN
buttons. If a
symbol is present, enter particular sub-
menus by pressing the
SET
button. To change the parameters use the
LEFT
and
RIGHT
buttons.
In order to leave the menu select
EXIT
and press
SET
. Depending on the value of the parameter
located to the right of the
EXIT
text, different actions are taken on exit:
•
selecting
SAVE
and pressing
SET
means that the changes that have been made are saved and
are kept even when the camera restarts.
•
selecting
NOT SAVE
and pressing
SET
means that the changes that have been made are
temporary and will be cancelled once the camera restarts.
•
selecting
RESET
and pressing
SET
results in restoring factory defaults.
To exit submenu please select
RETURN
position, and when
Press SET to Return
message is
displayed at the bottom part of the screen press
SET
button to leave the menu .
After one minute of inactivity in the menu camera will automatically exit from the programming
mode.
5.1 Main menu
In order to enter the menu press the
SET
button. The following main menu is displayed on the
screen:
SETTINGS
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.SSDR
OFF
5.BACKLIGHT
HLC
6.DNR3
ON
7.DAY/NIGHT
COLOR
8.SPECIAL
9.EXIT
SAVE
