NVC-601D-white, NVC-601D-black -
User’s manual ver. 1.0.
All rights reserved © AAT Holding Sp. z o.o.
8
4. INSTALLATION
Prior to installation please familiarize yourself with the product, its parameters and installation
process.
To install the camera please follow the instructions below:
Open the dome cover. In order to do this small coin or screwdriver might be useful. Put the coin
or screwdriver into the slot and turn gently. Pay extra attention to avoid scratching edges of the
camera.
Place base of the camera in a desired place and use its mounting holes as a drilling pattern.
Mark drilling points using a punch.
Drill the screw holes and cable hole using an appropriate driller, in case of concrete ceiling or
wall mounting please use appropriate plastic plug and screws (not included in the package).
Mount the camera to desired surface using included screws or if needed, different mounting kit
(not included).
Adjust the position of the camera module.
If needed, unscrew the blocking screw and adjust focus.
If needed, adjust the desired settings in the camera menu, using function button
(with optional NV-RCB2 wire controller).
Mount the camera cover by pushing it gently onto the base, until it locks. Please ensure that
masking shield does not block the field of view of the camera.
INSTALLATION
Cover slot useful for
dome opening
