NVC-601D-white, NVC-601D-black -
User’s manual ver. 1.0.
All rights reserved © AAT Holding Sp. z o.o.
14
5.1.4
WHITE BAL
submenu
This feature allows to set appropriate color settings using following options:
ATW
auto tracking white balance based on color temperature.
AWC
→
SET
this mode enables adaptive setting of white balance. In order to obtain the optimum
state under the current illumination, direct the camera at a sheet of white paper and press
SET
. When
lighting parameters change (e.g. light bulbs changed to halogen lamps, daylight to artificial light
etc. ), procedure mentioned above should be repeated;
AWB
auto white balance adjustment.
MANUAL
manual mode settings. In case of inappropriate color settings for
ATW, AWC
modes it is
possible to set
RED
and
BLUE
values manually. Color values range from 0 to 100 and are
represented by sliders. Any change in the color components are instantly applied to the image.
5.1.5
D&N
submenu
Allows to adjust day/night settings. Available settings are:
AUTO, EXT, COLOR
,
B/W
.
AUTO
Camera switches between night (b/w) and day (color) mode automatically, depending on
current illumination conditions. Selecting and confirming displays the following sub-menu:
DELAY
sets the delay between color and b/w mode switching (1~15 s.).
D->N (AGC)
sets the illumination threshold that switches the camera from day to night mode
(0~255)
N->D (AGC)
sets the illumination threshold that switches the camera from night to day
mode (0~255).
EXT
selecting enables day/night switching based on indications of CDS sensor. Additionally, entering
the sub-menu allows to adjust
DELAY
(1~15 s.).
COLOR
forces continuous color operation.
B/W
forces continuous black & white operation. Selecting allows for adjusting additional values:
BURST
enables/disable chrominance synchronization signal.
IR SMART
function ensuring balanced brightness level of the picture during operation with an
IR illuminator (which prevents overexposure of the objects located close to the camera and its
illuminator). Entering the function allows to set function area and sensitivity, in the same
manner as in motion detection menu.
IR LED
unavailable
SETTINGS
D&N AUTO
DELAY
---I--- 6
D->N (AGC)
----I-- 150
N->D (AGC)
-I----- 20
RETURN
RET
