NVC-601D-white, NVC-601D-black -
User’s manual ver. 1.0.
All rights reserved © AAT Holding Sp. z o.o.
13
Submenu presented allows to set the size and location of the area where the
BLC
function is active,
furthermore it allows to set the sensitivity of the function.
VALUE
sets the function’s sensitivity (LOW, MIDDLE, HIGH)
AREA
allows to choose beetwen SINGLE or DOUBLE zones, adjust the position and size
DEFAULT
restores default BLC settings.
HSBLC
high light compensation function. It allows to enhance visibility of the objects located near
the strong, point light source. If a strong, point light source appears on the screen , function will mask
it for effective observation of the scene itself (this function is best used to, for example, observe
licence-plates of the cars). Selecting displays the following screen:
GAIN
sets the function’s sensitivity (from 0 to 100)
MODE ALL DAY
or
NIGHT ONLY
(recommended)
MASK LEVEL
defines size of masking area.
DEFAULT
restores default HSBLC settings.
M. SKIP AREA
turns on and allows to set size and position of area which isn’t masked.
D-WDR
this function allows to enable/disable wide dynamic range function that enables to
effectively observe the scene with different illumination levels.
LOW LEVEL
sets the function’s sensitivity for low ilumination areas (from 0 to 15).
HIGH LEVEL
sets the function’s sensitivity for high ilumination areas (from 0 to 15).
SETTINGS
HSBLC
GAIN
----|--55
MODE
NIGHT
MASK LEVEL
--|----25
DEFAULT
M. SKIP AREA
OFF
RETURN
RET
DWDR
LOW LEVEL
-|----- 2
HIGH LEVEL
------| 10
RETURN
RET
