NVC-601D-white, NVC-601D-black -
User’s manual ver. 1.0.
All rights reserved © AAT Holding Sp. z o.o.
9
INSTALLATION
4.1 Connections
The camera is equipped with a video and power cable finished with 2 plugs, one for video output
(yellow one), the other for power supply 12VDC±10% (red one). Images below show plug
polarization.
The following connecting order should be kept:
connect video cable to the BNC plug
connect power supply to the power plug
ATTENTION
: Prior to connecting the power supply make sure that all required parameters (output
voltage, output current and polarization) are correct. Using improper power supply
may cause malfunction or camera damage. In such a case, warranty is void.
4.2 Focus setting
Camera focus is set by default. In some specific cases it may be necessary to correct the focus setting.
In that situation please follow the instruction below .
open the dome - as shown in chapter 4
loose the blocking screw shownon the below picture
to set the focus turn lens to the left or to the right
screw on the blocking screw carefully till slight resistance is felt
close the camera dome
ATTENTION:
If the lens has signs of fingerprints or other smudges/stains, the image quality
might be poor. In that case the lens should be cleaned with a special cloth designed for cleaning
the optics.
video
12 VDC +/-10%
video
ground (GND)
+
- (GND)
Allen screw blocking the lens
