NHDR-52xxAHD, NHDR-50xxAHD-II
User's manual ver. 1.2
All rights reserved © AAT Holding S.A.
29
DVR MAIN MENU
2.1.4.6. FTP section
Function used to save captured pictures on the FTP server. Set IP, User Name and Password to save
the captured video on the server.
FTP Enable:
enable / disable function. When the function is enabled. Every motion detection or
alarm will save the picture on the FTP server.
Server IP:
Enter the server IP address.
Port
: Enter Port number.
Name
: Enter login to the FTP Server.
Password
: Enter password to the FTP Server.
Max length of file:
(not used)
Directory
: path on the FTP server for saving captured pictures.
Test FTP:
allows to check the function operation. In case when incorrect parameters are entered, an
appropriate error message will be displayed.
2.1.5. Alarm submenu
Alarm submenu allows for defining reaction for different alarm events.
2.1.5.1. Motion detection
Section allows to configure motion detection function of the DVR.
Channel -
select the channel from the drop-down list.
Enable -
enable/disable the motion detection function for channel selected above.
Buzzer -
when motion detected, buzzer will sound (disable, 10 seconds, 20 seconds, 40 seconds and
60 seconds).
Sensitivity -
set the motion detection sensitivity threshold for each of the inputs, depending on the
specification of an observed scene. Support 1-8 level, 8 is the highest level.
Area Setup -
select the zones where the motion will be detected.
