All rights reserved © AAT Holding S.A.
NHDR-xxxxAHD, NHDR-xxxxAHD-II
User's manual ver. 1.2
20
DVR MAIN MENU
Channel -
select the channel from the drop-down list.
Channel Name -
enter the channel name, which will be displayed at the OSD. Support up to 8
characters
Show Name
- turn on/off displaying name.
Record Time -
enable or disable displaying system time in recording.
Position -
sets the position for the channel name on the display.
Color -
click “Setup” to enter into the color setting menu. It allows for channel selection, and
changing parameters such as Hue, Brightness, Contrast, Saturation of the video.
Covert -
enable or disable hiding the video channel on the display screen.
Show Time -
enable or disable the system time display in live mode.
Copy -
copy the parameters from selected channel to any other channel or all channels.
2.1.1.4. Output section
Output section allows to set:
Video Output -
live output.
Sequence Mode -
set sequence division.
SEQ Dwell Time -
sequence time is set 5 seconds by default. User may set it as required, maximum
time is 5 minutes.
VGA/HDMI Resolution -
monitor output resolution: 800
×
600, 1024
×
768, 1280
×
1024,
1440
×
900, 1280
×
720, 1920
×
1080
Transparency -
adjust menu transparency in the range of 0-128.
Support overscan
- change display format, in case of displaying problem.
2.1.1.5. Privacy Zone
Privacy Zone is for setting blacked out areas of the video in the selected channel. NHDR allows to set
4 privacy zones per channel.
