All rights reserved © AAT Holding S.A.
NHDR-xxxxAHD, NHDR-xxxxAHD-II
User's manual ver. 1.2
10
DVR OPERATING
1.7. PTZ control
Press the
button on the channel menu, or PTZ button on the front panel of the DVR to open
PTZ control panel. Before start using it make sure that PTZ camera is connected ( please read
chapter 2.6 Connecting PTZ cameras of the short manual ), and DVR is configured (please read
chapter 2.3.2. Device / PTZ submenu)
1.
Channel selection
2.
Pan / Tilt
navigation buttons: moves the vertical / horizontal camera module.
3. Run
Pattern
(no1) saved in camera.
4
Speed
: Change the speed of the camera module movement.
5. Operate
Zoom
of the camera.
6. Operate
Focus
of the camera.
7. Operate
Iris
of the camera.
8. Expand the PTZ window.
9.
Preset number
, can be used to call or set camera preset. Enter the number and press
Set
to
define preset.
Go to
calls the preset.
10. Display camera menu (concerns UTC cameras, chapter 1.8.)
The presets saved via this panel contain create PTZ Cruise. Set the
Time
of each preset.
Total
means number of saved presets. Press Save to remember the settings. PTZ Cruise can be started
from the popup menu.
1.8. UTC camera management
UTC technology (up the coax) allows to controlling the camera via coaxial cable. The feature
simplifies installation process and allows for remote managing at any time of the camera operation.
Caution! UTC feature is available with certain pieces of the NHDRs.
The presence of the
function can be determined by the serial number. For verification, please visit the website
www.novuscctv.pl, and display the subpage of the particular model.
1
2
3
4
5
6
7
8
9
10
