NDR-EA2104 / NDR-EA2208 / NDR-EA2416 User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
44
RECORDER’S MENU
To format the HDDs select
Format
. After that, the following screen appears:
Note:
All data stored on the formatted HDDs are lost in the process!
To select an HDD for formatting please select it in the first column to the left.
Capacity
column displays the information on HDDs total disk space.
Type
column displays the information about the HDD.
N/A
means HDD is not installed.
Usage
column displays information on current HDD operation mode.
Record
- HDD for recording
data, (-) - HDD not ready for the operation, requiring format,
Read only
- HDD contains recordings
that can be played back, recording on such an HDD is impossible.
Please select HDD(s) in the first column to the left, select
Record
in the
Usage
column, and finally,
press the
Format.
A window is then displayed, asking for confirmation, with formatting process taking
place after confirming. After confirmation, format is performed.
After selecting
S.M.A.R.T.
tab the following window appears:
Good
- proper HDD operation,
Bad
- HDD doesn’t operate properly, either to the possible HDD
damage, lack of formatting or improper connecting.
Fail
- disk failure, (
-
)
- lack of disk.
Note:
In case of encountering
Bad
or
Fail
messages an instant check-up or HDD replacement os
strongly advised.
Temperature
column displays information on temperature in centigrade or Fahrenheita (F).
Update
refreshes the information.
