NDR-EA2104 / NDR-EA2208 / NDR-EA2416 User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
13
STARTING THE DEVICE
1.
VIDEO IN:
16 or 8 (depending on the model)
video inputs for connecting video signal
sources to the DVR
.
Note:
When using twisted pair cable counting several hundred meters in
length as a transmission medium and with low video signal strength,
small crosstalk may appear .
2.
AUDIO IN 1~8:
8 audio mono inputs (RCA LINE IN type on the additional cable in set
included) for connecting microphones.
Note:
Sound recording may be conducted only when legal regulations of
a given country allow for such activities.
3.
NETWORK:
RJ-45 connector for connecting the DVR to the computer network in
10/100Mb/s standard.
4.
VGA:
Main monitor connector, VGA type. Please use signal cable provided with
the monitor when using aforementioned connection type. VGA out works
simultaneously with the CVS video out.
5.
CVBS
:
Main monitor connector, Composite Video Signal
(CVS). CVS out works
simultaneously with the VGA video out.
NOTE !
DVRs feature independent display on two monitors simultaneously. Operating the DVR is possible
only from one monitor at a time. By default VGA monitor output is enabled. In order to switch output
from VGA to BNC or from BNC to VGA please fallow instructions below.
- press and hold the DISPLAY button on the front panel (or IR remote) for about 3 seconds
- click both mouse buttons at the same time
- select
Move Display Focus
position from the menu available after pushing right mouse button or
ENTER
.
Table containing options of independent dual display is presented on the previous page.
N/A
description means that the function can't be realized on the same time.
2.3.2 Electrical connection and other back panel elements of the NDR-EA2208 and NDR-EA2416
NDR-EA2416 view
1
14
2
6
7
8
9
10
13
5
3
11
4
12
