NDR-EA2104 / NDR-EA2208 / NDR-EA2416 User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
10
By default, 2 SATA as well as power cables are connected to the mainboard, ready for connecting
HDDs and recorder, as depicted below:
After removing top cover of the DVR, please mount the included HDDs using screws (4 screws for
each HDD), next, connect power and signal cables.
Below presents a picture of the DVR, with 2 HDDs mounted.
After connecting all devices, please put the top cover onto the DVR and turn the device (check chapter
2.6 Plugging in the power
) on in order to check the operation of particular components and to format
the HDDs.
HDD MOUNTING
