NDR-EA2104 / NDR-EA2208 / NDR-EA2416 User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
18
STARTING THE DEVICE
2.6. Controlling via IR remote controller
The set includes an IR remote controller. Its range depends on battery status and may vary between
a few and few tens of meters. Single remote may control up to 99 DVRs. If an ID number of the
device equals 0, the IR remote control of that device is possible instantly, without any additional
setup (furthermore, simultaneous controlling of few DVRs with the same remote is possible).
To successfully control a DVR with its ID equal 1~99, please press ID button first. An ID selection
menu appears on the DVR screen. Please enter appropriate ID number in the Controller ID field,
corresponding to the ID set in the DVR. Confirm by pressing OK.
Picture of IR remote together with description of its button functions is presented below:
1.
Button enabling/disabling emergency recording. Enabling it starts
recording all video signals from all channels and displaying the icon
on the screen. Recording is realised with parameters defined in the
RECORD
menu.
Note:
Operation of this function depends on settings in the
RECORD
-> Record
menu.
2.
1~0 Buttons
channel selection buttons: pressing a button displays picture from the
camera corresponding to it. Current channel number is displayed in a
blue rectangle located at the top right part of the screen. Channel
selection buttons are also used for entering digits in the recorder’s OSD.
3.
pressing it while in live view opens the recorder’s menu (after logging
in). Menu is then displayed on the screen (its description being presented
in later parts of the manual). Additionally, button allows to exit the
menu, go a level up or turn the screensaver on. In playback and PTZ
control modes the button allows to enable/disable additional menus.
4.
DISPLAY
toggles between different display formats. Press it and hold for about 3
seconds to change the output from VGA to BNC or from BNC to VGA.
5.
SEQUENCE
selecting displays live channels sequentially.
NDR-EA2xxx IR remote view
