28
3.
2.
4.
1.
1.
Follow steps 1 to 6 of timer /Powerhead
replacement.
2.
Remove four screws from the plate on the
valve body.
3.
Remove the plate from the valve body and pull the
Piston Assembly from the valve. The brine valve
assembly can also be removed in this stage.
4.
Remove the seal spacer assembly, grease it
with silicone lubricant and put back in.
5.
Replace piston assembly followed by timer assembly.
6.
Replace the piston assembly and reverse
following steps in this section
Remove 2 X
Screws
Brine Valve
Assembly
Piston
Assembly
Plate
Seal and
Spacer
CLEAN INJECTOR ASSEMBLY
1.
Remove two screws of the injector cap.
2.
Pull the Injector Cap Out
3.
Remove the injector assembly, oring and screen
4.
Clean the injectors and replace cap
PISTON AND/OR BRINE VALVE ASSEMBLY REPLACEMENT
