![NOVO 165- 150 Owner'S Manual Download Page 26](http://html1.mh-extra.com/html/novo/165-150/165-150_owners-manual_1712234026.webp)
26
2 X Screws
Front Cover
1.
Disconnect the meter cable from the meter. (If flow
meter is attached)
2.
Remove two screws from the back of the valve cover
3.
Remove the piston screw and washer from the piston
rod.
4.
Remove the two screws from the powerhead as shown
5.
Life the powerhead from the valve body assembly
6.
Replace the powerhead by reverse following the steps in this section
Piston Screw
Washer
2 X Screws from Powerhead
Powerhead
Assembly
Valve Body
Assembly
Meter Cable
TIMER REPLACEMENT
CAUTION!
Disassembly while under
pressure can result in flooding.
Always follow these steps prior
to servicing the valve.
WARNING!
ELECTRICAL SHOCK
HAZARD!
UNPLUG THE UNIT
BEFORE REMOVING THE
COVER OR ACCESSING ANY
INTERNAL CONTROL PARTS