OY NORDIC SPA LTD | Tehdaskatu 7, 24100 Salo | www.novitek.fi
27
EN
FACTORY INSTALLED ACCESSORIES
You can use remote control to adjust the pool’s settings from anywhere and check the status and
functions of the pool. The new generation of CMS™ remote control also sends notifications to your
mobile phone about any issues with the pool. The remote control requires a Wi-Fi connection near the
pool to function.
CONTROLMYSPA™ REMOTE CONTROL
1. Connect the CMS Gateway Ultra unit to a modem with a network cable and connect the power cable
to the unit.
2. Download the
CONTROLMYSPA
application via your phone’s app store.
3. Stand next to the pool and make sure that power to the pool is turned on.
PLEASE NOTE! CMS can be found 15 minutes after the pool is turned on. If necessary, turn off power to
the pool, wait for 20 seconds and then turn the power back on.
4. Open the CONTROLMYSPA application on your phone, press “SETUP” and follow the instructions on
the screen.
5. The CMS code is
PDS-85415
TROUBLESHOOTING:
•
Red light in the CMS Gateway Ultra unit: The unit and the pool are not connected.
•
Blinking red light in the CMS Gateway Ultra unit: The unit and the pool are connected, but there is
no connection to the control panel.
•
Blinking blue light in the CMS Gateway Ultra unit: Software update in progress. Do not turn off the
power.
•
Blinking green light in the CMS Gateway Ultra unit: The unit and the pool are connected, but there
is no Internet connection.
•
Green light in the CMS Gateway Ultra unit: The unit and the pool are connected and an Internet
connection has been established. No errors.
In the Exclusive hot tubs, CMS ™ remote control is always standard.