OY NORDIC SPA LTD | Tehdaskatu 7, 24100 Salo | www.novitek.fi
21
EN
1. Tempe
2. Temperature –
3. Menu
4. Jets 1 ON/OFF
5. LED lights ON/OFF
The pool’s pump is turned on by pressing the
JETS 1
button
4
. The pump starts either at fi ltration or
massaging speed, depending on the pool mode. If the pump starts at fi ltration speed, you can turn on
massaging speed by pressing the
JETS 1
button
4
again. The massaging speed turns off automatically
after 15 minutes and the fi ltration speed after 30 minutes, or you can turn them off by pressing the
JETS 1
button
4
4
.
If the pool is in READY mode, the fi ltration speed turns on automatically when the pool checks the
water temperature every 30 minutes. If the fi ltration speed has turned on automatically, it cannot be
turned off, but you can turn on massaging speed by pressing the
JETS 1
button
4
.
JET PUMP
SCREEN SYMBOLS
A - HEATING
B - READY MODE
C - REST MODE
E - WIFI CONNECTED
F - LIGHTING
G - CLEANING CYCLE
H - JETS 1
I - JETS 2
L - TEMPERATURE (HIGH / LOW)
M - SETTING (PROGRAMMING)
N - FILTRATION CYCLE (1 OR 2 OR BOTH)
O - AM OR PM (TIME)
The pool temperature is factory set to 37 °C. The temperature setting is adjusted with the WARM and
COOL buttons
1
2
. When the desired temperature is no longer blinking on the display, the pool starts
heating the water to the set temperature if necessary.
PLEASE NOTE! The actual water temperature will not be shown until the pump has run for at least two
minutes.
SETTING THE TEMPERATURE
STANDARD
MAIN VIEW