16
OY NORDIC SPA LTD | Tehdaskatu 7, 24100 Salo | www.novitek.fi
EN
The pool temperature is factory set to 38 °C. The water temperature is set in the main view by first
pressing the arrow key to the left, then the set temperature text turns white. The temperature setting is
adjusted up or down with the arrow keys. Save the changes by pressing the
select key
.
3
.
SETTING THE TEMPERATURE
The time must be set immediately after the pool’s installation, as the correct time is important for the
functionality of the filtration cycles. If the time has not been set, there will be a message showing Set
Time. The time is set by choosing
Time of Day
in the
Settings
menu. Navigate right or left to change
the hours, minutes and the 12h/24h option. The time can be adjusted up or down with the arrow keys.
Save the setting by navigating onto the Save symbol and pressing the
select key
.
3
.
SETTING THE TIME
The pool has three jet pumps, of which
JETS 1
is a dual-speed pump.
JETS 1
pumppu käynnistyy joko
suodatus- tai hierontanopeudelle, riippuen altaan tilasta.
JETS 1
pump starts either at filtration or
massaging speed, depending on the pool mode. If the pump starts at filtration speed, you can turn on
massaging speed by pressing the
JETS 1
button again. The massaging speed turns off automatically
after 15 minutes and the filtration speed after 30 minutes, or you can turn them off by pressing the
JETS
button. The other pumps of the pool always start up at massaging speed.
PLEASE NOTE! If the pool is in READY mode, the filtration speed turns on automatically when
the pool checks the water temperature every 30 minutes. If the filtration speed has turned on
automatically, it cannot be turned off, but you can turn on massaging speed by pressing the
JETS 1 button
The massage intensity can be adjusted for each seat individually, with
controllers on the side of the pool. The massage intensity increases
when turning the controller counterclockwise, and likewise decreases
when turning it clockwise.
JET PUMPS
AIR CONTROLS
The pool’s LED lights can be turned on by pressing the
LIGHT
button
2
. To turn off the lights, press
the
LIGHT
button
2
again. The pool’s LED lights have different colours and light modes. To change
the light mode, turn off the LED lights and immediately turn them back on. The LED lights turn off
automatically four hours after being turned on.
LED LIGHTS
The control panel of the pool is locked by selecting Lock in the Settings menu. In the Lock view, you
can choose between locking the entire key panel (Panel) or only the settings (Settings). By only locking
the settings, the lights and jets of the pool can be used normally.
You can unlock the panel in the same menu by first pressing the
select key
twice
3
, and then the
down arrow once.
KEYLOCK
SELECT BASIC