User Manual
XLP 604
3.
Pull the roll of used ribbon from the rewinding mandrel:
4.
Remove the empty cardboard sleeve from the unwinding mandrel and push it onto the rewinding
mandrel.
5.
Clean the print head.
What to do next
Inserting a new ribbon roll.
Alternating use of different sorts of ribbon
Before you begin
The warning notes about inserting ribbon have been read and understood (see
About this task
To switch between
different types of ribbons
, there is no need to cut off the ribbon each time and then
insert it and fasten it to the ribbon rewinder.
It’s easier as follows:
Edition 2 - 12/2021
67
Operation
Inserting and removing ribbon
