User Manual
XLP 604
Options and accessories
Internal Options
…should be factory-fitted or installed by a service technician:
•
Reflex sensor
: Light barrier fork that apart from the transmission sensor, also contains a reflex sen-
sor (detects reflex marks on the material bottom side).
•
BasicIO
: Signal interface (24 V, PNP, 3x M12)
Not yet available.
•
Basic-USI
: Signal interface (24/5 V, NPN, D-Sub 15)
Not yet available.
•
8IO
: Signal interface (24 V, PNP, 2x M12)
Not yet available.
•
Ribbon saving function
: No ribbon is consumed over unprinted areas of the label layout
•
Peripheral preparation
: Additional D-Sub connector at the front for external devices
•
Internal rewinder
: Rewinds the printed label web inside of the printer
External Options
…do not require any special alterations to the printer:
•
Cutter
(prerequisite: printer version “Peripheral”)
•
External rewinder
for material rolls with 38 mm (1.5”), 75 mm (3”) or 100 mm (4”) cores (prerequisite:
printer version “Peripheral”)
•
Dispensing edge
(prerequisite: Internal rewinder installed)
–
M type:
Manual removal of the dispensed labels (dispensing edge with light barrier)
–
A type:
Automatic processing of the dispensed labels by the LTMA applicator
•
Applicator
LTMA (prerequisite: printer version Dispenser type A)
Accessories
...require no conversion work or are simply plugged into one of the printer's connections.
•
4“ core adapters for the label unwinder
for Label rolls with 4“ inner diameter
•
Foot switch
for foot-operated single label printing. The foot switch is available with M12 or D-Sub
connector (prerequisite: BasicIO board or Basic-USI board installed)
•
Keyboard
for comfortable data input in standalone mode (USB connector)
Edition 2 - 12/2021
20
Product Description
Design Models
