User Manual
XLP 604
2.
If the printer is equipped with the ribbon saving function, the ribbon roller (picture above, C) is
made of rubber.
(Optional) Moisten a cloth with roller cleaner and wipe the ribbon roller (C) with it.
CLEANING THE LABEL SENSOR
Procedure
Cleaning for light soiling:
1.
Open the front hood.
2.
Open the print head pressure lever.
3.
Remove the label web from the print module.
4.
(Optional) Loosen the ribbon web and push it aside at the print head.
5.
Blow out the gap in the sensor fork (A) with compressed air.
The sensor is located at the end of the sensor fork. For heavy soiling, additionally clean with
spirit and dust-free cloth.
Cleaning for heavy soiling:
6.
Unscrew screw (A).
A
Edition 2 - 12/2021
111
Cleaning
Cleaning the label sensor
