User Manual
XLP 604
6.
CAUTION!
Poor printing results due to wrinkling of the ribbon!
► Tape the ribbon to the cardboard core as described (in no case wrap or
knot the ribbon end around the cardboard core - the knot would lead to wrin-
kling!)
Insert the ribbon into the printer as shown. Fasten the end of the ribbon with adhesive tape to the
empty ribbon sleeve (figure below).
7.
Rotate the rewinding mandrel a few turns in a counter-clockwise direction until the ribbon is free of
folds.
8.
Close the pressure lever and the front hood.
9.
(Optional) If the ribbon type is used for the first time: Make the following parameter settings in the
menu
>
Material
>
Ribbon
:
–
–
on page 51
–
on page 51
–
on page 51
–
on page 51
Edition 2 - 12/2021
65
Operation
Inserting and removing ribbon
