Novell SENTINEL 6.1 SP2, User Manual, Page: 416 / 528

416 Sentinel 6.1 User Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
2 Click rules in the upper left corner of the page.
3 The Rules tab displays on the right panel of the page.
The Forward Events To Another Sentinel System rule displays under the Rules tab.
4 To activate the Forward Events To Another Sentinel System rule, click the check box next to
the rule.
If the rule is activated, a
Successfully activated the rule
message is displayed.
17.6.2 Configuring Sentinel or Sentinel Rapid Deployment
System as a Sender
If Sentinel or Sentinel Rapid Deployment is the sender, you must configure the Sentinel Link
Integrator plug-in and Sentinel Link Action plug-in to create a Sentinel Link configuration. You also
need to create an action that forwards the selected events to the receiver system. To filter the events,
set a correlation rule by using the Correlation Manager. After creating the rule, associate the action
to it, and deploy the rule. You can also use Global Filters to filter the events and forward them to the
receiver system.
Follow the instructions given below to configure Sentinel or Sentinel Rapid Deployment server for
sending the events:

“Configuring the Integrator Plug-In” on page 416
 “Configuring the Action Plug-In” on page 423

“Filtering Events to Forward to the Receiver” on page 423
Configuring the Integrator Plug-In
The Sentinel Link Integrator allows you to forward the events to another Sentinel system.
To use an Integrator plug-in, one or more Integrator instances must be configured with valid
connection information.
1 Log in to the Novell Sentinel Control Center as an administrator.
2 Select Tools > Integrator Manager . The Integrator Manager window displays.
3 Click the Add Integrator icon in the bottom left corner. The Basic Information window
displays.