Novell SENTINEL 6.1 SP2, User Manual, Page: 322 / 528

322 Sentinel 6.1 User Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
NOTE: By assigning steps to other roles, will mean having to log out and then log in as a user
assigned to that role and accept the process. For simplicity, the following example is assigned to one
role.
To run this process, this process must first be assigned to an incident.
To Start or Terminate a Process:
1 Click the Incident tab.
2 Click Incidents > Create Incidents.
3 Specify the following:
 Title: iTRAC Tutorial

Category: Other
 Responsible: assign this Incident to yourself
4 Click the iTRAC tab, select iTRAC Process Tutorial.
5 Click Create.
NOTE: Because this is a tutorial Incident and not a true Incident, it can be deleted without
negatively affecting your Sentinel setup.
6 From anywhere in the Sentinel GUI, click the Analyst group (yellow bar) under View work
items.
NOTE: Your bar might already be partially green indicating that you have accepted (acquired)
an iTRAC Process.
7 All of the processes assigned to the Analyst role displays.
8 To accept a Work Item, highlight iTRAC Tutorial and click Acquire.