Novell SENTINEL 6.1 SP2, User Manual, Page: 115 / 528

iTRAC Workflows 115
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
The value of the variable can be used as part of a Conditional transition to determine the path the
workflow follows. It can also be used later as part of a Conditional Transition from a Decision step
to determine the workflow path.
NOTE: If the value is going to be used later as part of a Decision step, it should be marked
“Required.”
For example, an integer variable can be set by the user to hold the event rate. Output transitions from
the Manual Step can be defined so that if the event rate is greater than 500, one path is followed; else
another path is followed.
To create a variable:
1 Click iTRAC tab.
2 In the Navigator, click iTRAC Administration > Template Manager.
3 Click Add button in upper left corner to open a new template or highlight an existing template,
click View/Edit.
4 Right click Variables in the Process Tree and select the type of variable to add or right-click the
variable type and select Add [type] Variable.
5
Give the variable a name and specify the Default Value, if desired.
Boolean Variable: