Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009, Client Manual, Page: 149 / 164

Troubleshooting Virtual Machine Management
10
149
no
vd
ocx
(e
n)
13
Ma
y 20
09
10
Troubleshooting Virtual Machine
Management
The following sections provide solutions to the problems you might encounter while working with
the PlateSpin
®
Orchestrate VM Client:
Š
Section 10.1, “Adding Multiple NPIV Disks to a VM,” on page 149
Š
Section 10.2, “Accessing VMs and Host Servers,” on page 149
Š
Section 10.3, “Moving or Migrating the VMs,” on page 150
Š
Section 10.4, “Registering VM Hosts,” on page 151
10.1 Adding Multiple NPIV Disks to a VM
Š
“Duplicate NPIV disks are not allowed” on page 149
Duplicate NPIV disks are not allowed
Source: The PlateSpin Orchestrate VM Client.
Action: When you add an additional NPIV disk to a VM, ensure that the disk values
for Fabric ID, World Wide Name, Target ID, and LUN are unique for each
NPIV disk of the VM.
10.2 Accessing VMs and Host Servers
Š
“VM or host server is not accessible” on page 149
VM or host server is not accessible
Source: The PlateSpin Orchestrate VM Client.
Explanation: A VM or host server does not appear to be accessible for any actions. This
might be because its Enabled check box is disabled. By default, this check box
is enabled.
Action: In the Development Client:
1 In the Explorer panel, expand the Resources section.
2
Browse for and select the VM or host server.
3 Click the Info tab and expand the Info section.
4 For a VM, expand its Resource Information section; for a host server,
expand its VmHost Information section.
5 For a VM, make sure the Resource Enabled check box is selected; for a
host server, make sure the Enabled check box is selected.
6 If you changed the status of the check box, click File > Save to make the
change effective.
You should now be able to perform actions against the VM or host server.