Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009 Page 154 Client Manual Download

Page: 154 / 164

154

PlateSpin Orchestrate 2.0 VM Client Guide and Reference

ocx

Ma
y 20

A.2.1 SUSE

A remote directory containing the install files, specified by using the HTTP protocol: The
HTTPS protocol is not supported.

http://www.domain.com/install_sources/sles10sp2/

A remote directory containing the install files, specified by using the FTP protocol:

ftp://www.domain.com/install_sources/sles10sp2/

A remote directory containing the install files, specified by using the NFS protocol:

nfs://www.domain.com/install_sources/sles10sp2/

A.2.2 NetWare

A paravirtualized NetWare

operating system can be installed by using the same installation sources

as fully virtualized VMs.

NOTE:

Open Enterprise Server (OES) 2 and OES 2 Linux can be paravirtualized or fully

virtualized. NetWare 6.5 and earlier must be fully virtualized. See

Section A.1, “Disk Installation

Sources,” on page 153

for instructions on fully virtualizing the guest operating system.

A.2.3 Other Linux Installation Sources

Paravirtualized operating systems other than SUSE

and NetWare can be installed by using the

same installation sources as the fully virtualized VMs (see

Section A.1, “Disk Installation Sources,”

on page 153

Summary of Contents for PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009





































































































































































Search results

Summary of Contents for PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009

Reviews:

Related manuals for PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009

Brands by name

Popular brands

Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009, Client Manual

Search results

Summary of Contents for PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009

Reviews:

Related manuals for PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE 06-17-2009

Brands by name

Popular brands