170
GroupWise 7 Administration Guide
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
11.3.2 Configuring the POA for the New Post Office
Although there are many POA settings, the default settings are sufficient to get your post office
operational. However, there are a few important settings that you can conveniently modify before
you install the agent software.
1
In ConsoleOne, double-click the new Post Office object.
2
Right-click the POA object, then click
Properties
to display the POA Identification page.
3
Provide a description for the POA.
The description displays on the POA agent console as the POA runs.
4
Select the platform where the POA will run (
worksheet item 12
).
5
If you have created the post office in a clustered environment, follow the instructions in the
appropriate section of the
GroupWise 7 Interoperability Guide
.
6
For more POA configuration options, see
Section 12.10, “Changing POA Configuration to
Meet Post Office Needs,” on page 199
.
7
Click OK to save the POA configuration information.
11.3.3 Installing and Starting the New POA
To install the POA for the new post office to the location recorded under
worksheet item 11
, follow
the instructions in “
Installing GroupWise Agents
” in the
GroupWise 7 Installation Guide
.
