Novell EDIRECTORY 8.8 SP3, Administration Manual, Page: 623 / 634

Configuring GSSAPI with eDirectory 623
n
ov
do
cx (e
n)
11
Ju
ly 20
08
6 Specify the location of the
kerberosPlugin.npm
file or click Browse to select it.
The plug-in package is located at
extracted_folder /< platform(Linux, Solaris) >/nmas/NmasMethods/
Novell/GSSAPI/plugins/
, where extracted_folder is the directory where you extracted
the
edir88.zip
file. If you have moved the
kerberosPlugin.npm
file to a different
location, browse to the location and select it.
7 Click Install .
This installation will take a few minutes.
NOTE: An "Unexpected end of part" error may be encountered during module package install
when running iManager on a Windows IIS Web server with Tomcat. This is due to a known
issue with uploading files through the Tomcat redirector for IIS. To successfully run a module
package install, connect to iManager directly through Tomcat (for example, through port 8080).
For example, http://hostname:8080/nps/iManager.html
For more information, refer to the
Novell iManager 2.6 Administration Guide (http://
www.novell.com/documentation/imanager26/index.html) .
8 Restart the iManager server after the Successfully saved module message appears.
If you are running iManager in an Unrestricted Access mode (no RBS collection in the tree),
skip Steps 9-15.
NOTE: For information on restarting the iManager server, refer to the Novell iManager 2.6
Administration Guide (http://www.novell.com/documentation/imanager26/index.html) .
9 Log in to iManager, then click the Configure Description: Configure .
10 Click RBS Configuration > Configure iManager in the left pane.
11 (Conditional) If you have already created an RBS collection, select Upgrade collections and
then click Next > Next .
12 (Conditional) If you do not have an RBS collection, do the following:
12a Select Create a new collection , then click Next .
12b Select the container under which you want to create the Role Based services, then click
Next .
13
Select the Novell Kerberos plug-in, assign a scope (treename or any desired container), then
click
Start to complete installing the iManager plug-in for Kerberos configuration.
NOTE: This will assign supervisor rights to the selected scope for the Kerberos Management
role.
14 Wait for the Completed message, then click Close .
15 Refresh the page.
The Kerberos Management role is displayed on the left pane.
If the Kerberos Management role is not displayed, restart the iManager server as mentioned in
Step 8 on page 8.
NOTE: If the iManager server is running on a Windows Web Services (IIS), you must have an
RBS collection created before installing the iManager plug-in for NMAS Kerberos.